Other International SRK Websites
Tailings are the materials left over after the process of separating the valuable fraction from the uneconomic fraction gangue of an ore. Tailings are distinct from overburden , which is the waste rock or other material that overlies an ore or mineral body and is displaced during mining without being processed. The extraction of minerals from ore can be done two ways: placer mining , which uses water and gravity to concentrate the valuable minerals, or hard rock mining , which pulverizes the rock containing the ore and then relies on chemical reactions to concentrate the sought-after material.
In the latter, the extraction of minerals from ore requires comminution , i. Because of this comminution, tailings consist of a slurry of fine particles, ranging from the size of a grain of sand to a few micrometres.
Tailings are also called mine dumps , culm dumps , slimes , tails , refuse , leach residue , slickens , or terra-cone terrikon. The effluent from the tailings from the mining of sulfidic minerals has been described as "the largest environmental liability of the mining industry".
Although harmless underground, these minerals are reactive toward air in the presence of microorganisms, which if not properly managed lead to acid mine drainage. Between ,, and ,, tons of phosphogypsum waste are estimated to be produced annually as a consequence of the processing of phosphate rock for the production of phosphate fertilizers.
Tailings Paste Thickening
Bauxite tailings is a waste product generated in the industrial production of aluminium. Making provision for the approximately 77 million tons that is produced annually is one of the most significant problems for the aluminium mining industry.
Early mining operations often did not take adequate steps to make tailings areas environmentally safe after closure. Mine tailings may have economic value in carbon sequestration due to the large exposed surface area of the minerals.
The greatest danger of tailings ponds is dam failure, with the most publicized failure in the U. On average, worldwide, there is one big accident involving a tailings dam each year. See also List of tailings dam failures.
Historically, tailings were disposed of in the most convenient manner, such as in downstream running water or down drains. Because of concerns about these sediments in the water and other issues, tailings ponds came into use. The sustainability challenge in the management of tailings and waste rock is to dispose of material, such that it is inert or, if not, stable and contained, to minimise water and energy inputs and the surface footprint of wastes and to move toward finding alternate uses.
You are here
Bounded by impoundments an impoundment is a dam , these dams typically use "local materials" including the tailings themselves, and may be considered embankment dams. The modern tailings designer has a range of tailings products to choose from depending upon how much water is removed from the slurry prior to discharge.
The removal of water not only can create a better storage system in some cases e. In a description of tailings impoundments, however, the U.
Iron ore tailings pdf reader
EPA stated that dewatering methods may be prohibitively expensive except in special circumstances. Tailing ponds are areas of refused mining tailings where the waterborne refuse material is pumped into a pond to allow the sedimentation meaning separation of solids from the water.
The pond is generally impounded with a dam, and known as tailings impoundments or tailings dams. Tailing ponds are often somewhat dangerous because they attract wildlife such as waterfowl or caribou as they appear to be a natural pond, but they can be highly toxic and harmful to the health of these animals. Tailings ponds are used to store the waste made from separating minerals from rocks, or the slurry produced from tar sands mining.
Tailings are sometimes mixed with other materials such as bentonite to form a thicker slurry that slows the release of impacted water to the environment.
There are many different subsets of this method, including valley impoundments, ring dikes, in-pit impoundments, and specially dug pits. Exhausted open pit mines may be refilled with tailings.
In all instances, due consideration must be made to contamination of the underlying water table, amongst other issues.
Dewatering is an important part of pond storage, as the tailings are added to the storage facility the water is removed - usually by draining into decant tower structures.
The water removed can thus be reused in the processing cycle. Once a storage facility is filled and completed, the surface can be covered with topsoil and revegetation commenced.
However, unless a non-permeable capping method is used, water that infiltrates into the storage facility will have to be continually pumped out into the future. Paste tailings is a modification to the conventional methods of disposal of tailings pond storage.
In paste tailings the percent of solids in the tailings slurry is increased through the use of paste thickeners to produce a product where the minimal separation of water and solids occurs and the material is deposited into a storage area as a paste with a consistency somewhat like toothpaste.
Paste tailings has the advantage that more water is recycled in the processing plant and therefore the process is more water efficient than conventional tailings and there is a lower potential for seepage. However the cost of the thickening is generally higher than for conventional tailings and the pumping costs for the paste are also normally higher than for conventional tailings as positive displacement pumps are normally required to transport the tailings from the processing plant to the storage area.
Tailings do not have to be stored in ponds or sent as slurries into oceans, rivers or streams. There is a growing use of the practice of dewatering tailings using vacuum or pressure filters so the tailings can then be stacked. However although there are potential merits to dry stacked tailings these systems are often cost prohibitive due to increased capital cost to purchase and install the filter systems and the increase in operating costs generally associated electricity consumption and consumables such as filter cloth of such systems.
While disposal into exhausted open pits is generally a straightforward operation, disposal into underground voids is more complex. A common modern approach is to mix a certain quantity of tailings with waste aggregate and cement, creating a product that can be used to backfill underground voids and stopes. HDPF is a more expensive method of tailings disposal than pond storage, however it has many other benefits — not just environmental but it can significantly increase the stability of underground excavations by providing a means for ground stress to be transmitted across voids - rather than having to pass around them — which can cause mining induced seismic events like that suffered previously at the Beaconsfield Mine Disaster.
In most environments, not a particularly environmentally sound practice, it has seen significant utilisation in the past, leading to such spectacular environmental damage as done by the Mount Lyell Mining and Railway Company in Tasmania to the King River , or the poisoning from the Panguna mine on Bougainville Island , which led to large-scale civil unrest on the island, and the eventual permanent closing of the mine.
As of , only three mines operated by international companies continued to use river disposal: The Ok Tedi mine , the Grasberg mine  and the Porgera mine , all on New Guinea.
Cerro Nahuatl Iron Ore Mine in Colima, Mexico – A Conceptual Closure Plan
This method is used in these cases due to seismic activity and landslide dangers which make other disposal methods impractical and dangerous. Tailings can be conveyed using a pipeline then discharged so as to eventually descend into the depths. Practically, it is not an ideal method, as the close proximity to off-shelf depths is rare.
When STD is used, the depth of discharge is often what would be considered [ by whom? This method is used by the gold mine on Lihir Island ; its waste disposal has been viewed by environmentalists as highly damaging, while the owners claim that it is not harmful.
Phytostabilisation is a form of phytoremediation that uses hyperaccumulator plants for long-term stabilisation and containment of tailings, by sequestering pollutants in soil near the roots.
Copper and Molybdenum Flotation Circuit
The plant's presence can reduce wind erosion, or the plant's roots can prevent water erosion, immobilise metals by adsorption or accumulation, and provide a zone around the roots where the metals can precipitate and stabilise.
Pollutants become less bioavailable and livestock, wildlife, and human exposure is reduced. This approach can be especially useful in dry environments, which are subject to wind and water dispersion.
Considerable effort and research continues to be made into discovering and refining better methods of tailings disposal. Research at the Porgera Gold Mine is focusing on developing a method of combining tailings products with coarse waste rock and waste muds to create a product that can be stored on the surface in generic-looking waste dumps or stockpiles.
This would allow the current use of rivering disposal to cease. Considerable work remains to be done. As mining techniques and the price of minerals improve, it is not unusual for tailings to be reprocessed using new methods, or more thoroughly with old methods, to recover additional minerals.
A machine called the PET4K Processing Plant has been used in a variety of countries for the past 20 years to remediate contaminated tailings. During extraction of the oil from oil sand, tailings consisting of water, silt, clays and other solvents are also created. This solid will become mature fine tailings by gravity.
Foght et al estimated that there are 10 3 anaerobic heterotrophs and 10 4 sulfate-reducing prokaryotes per milliliter in the tailings pond, based on conventional most probable number methods. Foght set up an experiment with two tailings ponds and an analysis of the archaea , bacteria , and the gas released from tailings ponds showed that those were methanogens.
As the depth increased, the moles of CH 4 released actually decreased. Siddique , states that methanogens in the tailings pond live and reproduce by anaerobic degradation, which will lower the molecular weight from naphtha to aliphatic , aromatic hydrocarbons, carbon dioxide and methane.
Those archaea and bacteria can degrade the naphtha, which was considered as waste during the procedure of refining oil. Both of those degraded products are useful.
In other words, these methanogens improve the coefficient of utilization. Moreover, these methanogens change the structure of the tailings pond and help the pore water efflux to be reused for processing oil sands. Because the archaea and bacteria metabolize and release bubbles within the tailings, the pore water can go through the soil easily.
Since they accelerate the densification of mature fine tailings, the tailings ponds are enabled to settle the solids more quickly so that the tailings can be reclaimed earlier. Moreover, the water released from the tailings can be used in the procedure of refining oil.
South America: Dominga iron ore
Reducing the demand of water can also protect the environment from drought. From Wikipedia, the free encyclopedia. Redirected from Mine tailings. Main article: Tailings dam. Journal of Environmental Management. Trends in the stewardship of tailings dams.
Rock to Iron
Economic Geology. Resources Policy. An alternative to conventional tailing management - "dry stack" filtered tailings. Mine waste management. Chelsea, Mich. Environ Health Perspect. Archived from the original on 24 January Retrieved 19 October Retrieved 25 September Microbial content and metabolic activities in the Syncrude tailings pond. Methanogens and sulfate-reducing bacteria in oil sands fine tailings waste.
Extractive metallurgy. Metallurgical assay Non-ferrous extractive metallurgy. Calcination Roasting Liquation. Patio process Pan amalgamation. Biosolids , waste , and waste management. Blue Ribbon Commission on America's Nuclear Future Cleaner production Downcycling Eco-industrial park Extended producer responsibility High-level radioactive waste management History of waste management Landfill fire Sewage regulation and administration Upcycling Waste hierarchy Waste legislation Waste minimisation Zero waste.