At&t Phone Model Cl 4939 Manualidades

At&t phone model cl 4939 manualidades

You can also visit our website at www.

At&t phone model cl 4939 manualidades

In Canada, dial 1 Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants.

Used under license. All Rights Reserved. Your telephone package contains the following items.

At&t phone model cl 4939 manualidades

Save your sales receipt and original packaging in the event warranty service is necessary. If you subscribe to high-speed Internet service digital subscriber line - DSL through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack page 7. Your product may be shipped with a protective sticker covering the telephone base display - remove it before use.

At&t phone model cl 4939 manualidades

For customer service or product information, visit our website at www. You must use the supplied power adapter to use most features of this telephone. In the event of power failure, this telephone works only to make or answer calls with the handset.

At&t phone model cl 4939 manualidades

Refer to Line power mode no AC power on page 26 for more details. This telephone is hearing-aid compatible. This telephone features a speakerphone for hands-free use.

AT&T CL4940 Corded Standard Phone with Answering System

This telephone also features 10 two-touch memory locations for speed dialing and has a directory that can store up to 25 additional numbers with names. This telephone supports caller ID with call waiting service.

Caller ID services are subscriber services available from your telephone service providers and fees may apply. This telephone also features a built-in digital answering system that can store approximately 19 minutes of messages and memos with a total of up to 99 messages.

You can access the answering system from a remote touch-tone telephone. While reviewing the call history entries, press and hold to clear the call history page While entering names or numbers , press to backspace and erase a character or digit. During a call, press to answer an incoming call if you subscribe to call waiting service provided by your telephone service provider. While reviewing the directory or call history, press to scroll down pages 32 and While reviewing the directory or call history, press to scroll up pages 32 and While using the menu, press to save the setting and move to the next menu option page While using the handset or speakerphone, press to dial the last number dialed page While editing numbers in the two-touch memory or directory, press to copy the last number dialed.

While reviewing the call history, press to store the displayed name and number in the directory page During a call, press to mute the handset or speakerphone microphone. Press again to resume your. While the telephone is playing the day and time the current message was received, press to go back to the previous message page After the telephone plays the day and time the current message was received, press. VOL switch.

Press twice to delete all old messages when the telephone is not in use page The message window usually displays the total number of messages. See the table below for explanations of other displays in this window.

During playback, the number of the message. F The answering machine memory is full. Delete some messages to make room for more. If you subscribe to high-speed Internet service digital subscriber line - DSL through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack.

Plug one end of the coiled handset cord into the handset jack on the left side of the telephone base. Plug the other end into the handset and hang up. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end into an electrical outlet not controlled by a wall switch. Rotate the top of the display up or down to adjust the angle of the screen for maximum visibility.

AT&T CL4939 User Manual

To obtain a replacement, visit our website at www. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

At&t phone model cl 4939 manualidades

In this case, the telephone works only to make or answer calls with the handset, or adjust the ringer volume or handset listening volume. For optimal performance, power your telephone with the supplied power adapter.

Cordless headset spare parts

The telephone base comes with the bracket mounted for tabletop use. If you want to mount your telephone on a wall, use the mounting bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. Professional assistance may be required to install the mounting plate. To install the telephone base in the wall-mount position, make sure you first unplug the power adapter from the electrical outlet and unplug the telephone line cord from the wall outlet.

Lift the handset and place it aside. Hold down the switch hook on the telephone base, then slide the handset tab upwards to remove it from the slot. Rotate the handset tab degrees.

Push the handset tab down into the grooves so it settles into position. Grasp and squeeze as the arrows indicate to open the hinged bracket.

3d text in photoshop pdf

Rotate the bracket and lock it into wall-mount position as indicated below. Route the telephone line cord through the slot. Bundle the telephone line cord and secure it with a twist tie. Place the bundled telephone line cord inside the hole in the center of the telephone bottom. Place the telephone just above the telephone outlet mounting studs.

Join Our Email List

Slide the telephone down until the telephone is held securely on the telephone outlet mounting studs. Place the handset in the telephone base.

To change the telephone base from the wall-mount position to tabletop position, follow the steps below.

Red john happy face killer book

Unplug the large end of the power adapter from the electrical outlet. Slide the telephone base upwards, then pull the telephone base away from the wall and remove from the studs. Unplug the telephone line cord from the telephone base and telephone wall jack. Untie the bundled telephone line cord.

AT&T CL4939 Cordless Telephone User Manual

Remove the telephone line cord from the slot on the bottom of the telephone base. Lift and rotate the bracket and lock it into tabletop position as indicated below. When set to off, the screen shows.

NOTE: The volume of the priority call tone cannot be adjusted. Refer to Priority call on page 49 for details. Use the VOL switch on the right side of the telephone base to adjust the listening volume from the handset. Use the VOL switch on the right side of the telephone base to adjust the listening volume from the speakerphone.

' + heading + '

The screen display prompts help you set up the telephone when you press MENU. For complete feature setup options, see Feature summary on this page. Press MENU repeatedly until the screen shows the desired feature. Refer to Feature summary on this page for a full description of the features and your choices.

When you finish setting features, the telephone automatically returns to standby after 30 seconds, or you can press FLASH to exit programming immediately. Refer to Set date and time on page 18 for details.

Refer to Set home area code on page 19 for details. Refer to Set local area code on page. NOTE: If you have dial-pulse dialing service only, you can temporarily switch from dial-pulse to touch-tone dialing during a call see Temporary tone dialing on page If you choose tS or tS , the.

Press MENU repeatedly until the screen shows. Use the dial pad keys 0 through 9 to set the blinking digits. To enter a number that is less than 10, you must enter a zero 0 before the number. To enter the month of March, you must enter Before playing each message, the answering system announces the day and time the message was received see.

Galaxies and star clusters book

Information about messages on page Before using the answering system, use this menu to set the year so that the system can determine the correct day of the week. If you do not subscribe to caller ID service provided by your telephone service provider, you also have to set the day and. You must program your area code so your telephone can properly recognize and dial calls. Use the dial pad keys 0 through 9 to enter three digits of your home area code.